STMicro's
L6470 (a.k.a "dSPIN") is a 3A, 8-45V bipolar stepper motor driver. It
has built-in overcurrent detection, undervoltage detection,
overtemperature detection, stall detection, a 5-bit ADC, and a switch
input that can be used for either user jog control or as a hard stop
function. As if that weren't enough, it also features microstepping
support (up to 128 microsteps per full step) and PWM drive voltage
limiting.
Unlike most stepper motor drivers, the dSPIN is controlled
over an SPI link. It has an on-board 16MHz oscillator which allows it to
autonomously execute movement commands. That means no more counting
steps in your code! It also supports customized acceleration and
deceleration profiles to prevent jerky starts and stops. On-board
registers track current speed and location.
This L6470 Stepper Driver
Breakout makes it easy to put the dSpin to work in your project. Simply
connect your motors and your SPI-capable microcontroller and get
steppin'!
The logic supply voltage supports both 3.3V and 5V I/O levels.
Features:
Supports up to 128 Microsteps per Full Step
Over-Temperature Detect
Over-Current Detect
Under-Voltage Detect
PWM Drive-Voltage Limiting
SPI Controlled
On-Board Oscillator and Speed/Location Registers
Stall Detection
5-bit ADC
1 X L6470 Stepper Driver Breakout 3A 8-45V bipolar stepper motor driver board module
Note: all the descriptions and prices are subject to change without prior notice.
Free Shipping: No
Shipping Weight/Unit(g): 0.00
Std. Packing Qty. (pcs): 1
Report an Error (Win $10 Prize)
