-
Power-down detection module, power input (blue terminal) and UPS
are connected to a 110V / 22V power supply at the same time. The signal
output (three pins) is connected to the MKS TFT. (PB0 - B0 Gnd - -3.3V -
+).
-
When the power is suddenly powered off, the UPS can still power
the printer, and the power-down detection module passes the power-off
message to the MKS TFT.
-
When the MKS TFT receives the power-off message, it automatically
causes the printer to enter the paused state and removes the printhead
from the model without damaging the model.
-
MKS TFT itself has been cut off the power of the function, but
suddenly can only save the print state when the power can not move the
print head, continued to play when the flaws.
-
Use the power to continue to play modules and UPS can solve this
problem, while UPS only need to run about 1 minute, the requirements of
the UPS is not very high
1 X power failure detection module
1 X 3PIN DuPont line.
Note: all the descriptions and prices are subject to change without prior notice.
Free Shipping: No
Shipping Weight/Unit(g): 0
Std. Packing Qty. (pcs): 1
Report an Error (Win $10 Prize)