• 12V 433MHz Dual Channel Wireless Remote Control RF Transmitter
  • 12V 433MHz Dual Channel Wireless Remote Control RF Transmitter
  • 12V 433MHz Dual Channel Wireless Remote Control RF Transmitter
  • 12V 433MHz Dual Channel Wireless Remote Control RF Transmitter

12V 433MHz Dual Channel Wireless Remote Control RF Transmitter

SKU
MDL.1316
Customer #
MOQ
10
Packaging
1pcs/lot
Unit Price
RFQ

Payment Accepted

Bulk Order

Unit Price

<20 RFQ
20+ RFQ
50+ RFQ
200+ RFQ

Buyer Protection

  • Full Refund if you don't receive your order
  • Full or Partial Refund, if the item is not as described

Specification:
Input Voltage: DC 10V~14V
Standby Current: <8mA
RF Frequency: 433Mhz
RF Working Mode: Superheterodyne Reception
Receiving Sensitivity: -108dbm
Remote Control Receiving Distance: More then 100m in empty space
Decoding Mode: single chip decoding
Storable Remote Control: store up to 19 different codes
Working Mode: jog, self-lock, inter-lock
Wiring Mode: fixed wiring post
Output Mode: normally open, common, normally closed
Supported Remote Control Mode: learning code (1527), fixed code (2260)

About Working mode:

Momentary mode: Push the remote button, the relay connects, release the remote button , the relay disconnects.
Toggle mode:        Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching mode:     Push the remote button A, the relay connects, push the remote button B, the relay disconnects.

Clearing the code:
Push the learning button on the receivers for 8 times , the codes will be cleaned .
After clearning the code, all the remote control cannot work any more.

How to choose a working mode?


1) Momentary: Put the jumper cap on the jumper No.2 and No.3  like following

image.png




2) Toggle: Put the jumper cap on the jumper No.1 and No.2  like following


3) Latching:  Remove the jumper cap and leave the onboard jumper empty like following




Wiring: 
1. "+" : Connect to the positive pole of 12V power supply;
2. "-" : Connect to the negative pole of 12V power supply;
3. NO: output; normally open port of the relay;
4. COM: output; common port of the relay;
5. NC: output; normally close port of the relay;

NOTES:
1. Be sure to clear the code once for the first time use.
2. Please avoid the interference source and similar shield cover while installing.
3. Improper use will reduce the performance and longevity of the product, even bring potential safety hazard in severe case.
4. Suitable for controlling small power household appliances[Use high power for controlling fans].

Package Includes:
1 X12V 433MHz Dual Channel Wireless Remote Control RF Transmitter (receiver)

Note: all the descriptions and prices are subject to change without prior notice.

Free Shipping: No

Shipping Weight/Unit(g): 0.00

Std. Packing Qty. (pcs): 1

Report an Error (Win $10 Prize)