CJMCU-8118 CCS811 HDC1080 Carbon Dioxide CO2 Temperature And Humidity Sensor VOCs Air quality Monitor Sensor Module

• Working temperature: -20 ° C ~ 70 ° C

• Humidity sensor measurement range: 0 ~ 100% RH

• Humidity sensor accuracy: 14 bits error ± 2% RH

• Humidity repeatability accuracy: ±0.1% RH

• Humidity sensor response time: 15s

• Humidity conversion time: 8 bits 2.5ms, 11 bits 3.85ms, 14 bits 6.5ms

• Temperature sensor error: ±0.4 °C (ambient temperature 5 ° C ~ 60 ° C)

• Temperature repeatability accuracy: ±0.1 °C

• Temperature conversion time: 11 digits 3.85ms, 14 digits 6.5ms

• IIC communication frequency: 400KHz

• IIC slave address: 1000000x (x read/write control bit)

• Power supply: recommended 3.3V

• Power supply: recommended 3.3V

• Power consumption: up to 60mW

• IIC communication frequency: 400KHz

• eTVOC detection range: 0 ~ 32768ppb

• eCO2 detection range: 400 ~ 32768ppm

• Automatic baseline correction time for metal oxide sensitive layer: 24H

• Allow configuration and read sensor time after power up: at least 20 minutes

• ADD: CCS811 slave address selection bit, the default is connected to low level 1011010x, connected to high level 1011011x (x bit read and write control bit)

• RST: CCS811 reset control terminal, active low, not connected to high level when not in use, do not hang

• INT: CCS811 measurement end or over-threshold interrupt source output low level

• WAK: CCS811 wake-up control input, active low

• SDA: CCS811 and HDC1080 common IIC data signal lines

• SCL: CCS811 and HDC1080 common IIC clock signal lines

• VCC: CCS811 and HDC1080 common power supply terminal

Package includes:

1 X CJMCU-8118 CCS811 HDC1080 Carbon Dioxide CO2 Temperature And Humidity Sensor VOCs Air quality Monitor Sensor Module

Note: all the descriptions and prices are subject to change without prior notice.

Free Shipping: No

Shipping Weight/Unit(g): 0.00

Std. Packing Qty. (pcs): 1

Report an Error (Win $10 Prize)