• LCR-TC1 Multi-functional Tester for Diode Triode Capacitor Resistor
  • LCR-TC1 Multi-functional Tester for Diode Triode Capacitor Resistor
  • LCR-TC1 Multi-functional Tester for Diode Triode Capacitor Resistor
  • LCR-TC1 Multi-functional Tester for Diode Triode Capacitor Resistor
  • LCR-TC1 Multi-functional Tester for Diode Triode Capacitor Resistor

LCR-TC1 Multi-functional Tester for Diode Triode Capacitor Resistor

SKU
KTS.1075
Customer #
MOQ
10
Packaging
1pcs/lot
Unit Price
RFQ

Payment Accepted

Bulk Order

Unit Price

<20 RFQ
20+ RFQ
50+ RFQ
200+ RFQ

Buyer Protection

  • Full Refund if you don't receive your order
  • Full or Partial Refund, if the item is not as described

Feature:
Self test with automatic calibration
Size: 70X90X26mm
Display: TFT Screen, Color Screen
Diode Range: less than 4.5V
Zener Diode:Transistor Detect Area: 0.01-4.5V
Zener Diode Detect Area: 0.01-30V
Triac Range: IGT less than 6mA
Capacitance: 25pF-100mF
Resistor: 0.01-50MΩ
Inductance: 0.01mH-20H
Power Voltage: 3.7V
Power: Built-in Rechargeable Lithium Battery
 
Measurement results using 3.5" TFT graphic display (160x128 resolution)
One-button operation
Auto power off (timeout setting)
Built-in high-capacity rechargeable lithium-ion battery
Lithium-ion battery voltage detection
Support Chinese and English
Warning: Built-in lithium-ion battery, it is strictly forbidden to immerse the tester in water or near heat source!
Warning: For your personal safety, please strictly observe the specifications and precautions for using lithium-ion batteries!
 
Transistor Detection:
After the power-off state or test is completed, put the test component into the transistor test area of the test socket, press the lock handle, press the multi-function key, the tester automatically measures, and the measurement result is displayed at the end of the test.
Warning: Always discharge the capacitor before connecting them to the tester! The tester may be damaged before you turn it on!
Warning: We do not recommend using a tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged!
 
Component placement:
The test socket is divided into transistor and Zener diode test areas, as described in 1.1.
 
Note: Do not perform other operations during the calibration process to avoid affecting the calibration accuracy!
 
Packing includes:

1 x LCR-TC1 Multi-Tester 1 x electronic component group (sent random)3 x test hook
 
Short the three test sockets, press the multi-function button shortly, and the tester will automatically calibrate.
No other operations are required after disconnecting the short wiring according to the prompt during the calibration process.

Note: all the descriptions and prices are subject to change without prior notice.

Free Shipping: No

Shipping Weight/Unit(g): 0.00

Std. Packing Qty. (pcs): 1

Report an Error (Win $10 Prize)